|
The inside face that clamps to the board must be hand planed so that it is flat.
I mark out the places I want to cut and saw them as seen in the next picture.
The result of my first attempt is shown below. I obviously need to do a little more practicing, but the point is that the joint went together. It fits!
Now I just have to practice. This isn’t as hard as I have always thought it was. I can actually cut dovetails by hand, and I never could do that before.
I also made this simple
marking jig. Rosewood and brass works well together.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
